Gather some Adobe Serial Numbers and Version using ConfigMgr Compliance Settings and Hardware Inventory

Update to an older blog entry...

http://www1.myitforum.com/2012/06/13/gather-some-adobe-software-serial-numbers-using-configmgr-dcm-and-hardware- inventory/ :

Because this thread: http://social.technet.microsoft.com/Forums/en-US/configmgrinventory/thread/7243fac9-36c4- 4d1f-9b2b-eb1b2f53ed87, got me thinking about it, I went to the adobe blog entry they referenced, here: http://blogs.adobe.com/oobe/2009/11/software_tagging_in_adobe_prod_1.html

Searched our lab for a couple of clients with full Adobe products, and low and behold… found the .swtag files mentioned. Interestingly, that blog was a little misleading–it didn’t seem to cover some of the tags that are really in the .swtag files for serial number, version, etc… so I doubt the script (attached) will actually find everything. but it’s a start; so I thought I’d throw this out into the wild (blog it) and see what others can make of it.

Attached is a script, which you’d run similar to the "all members of all local groups" type of thing–run it on clients (either as a recurring advertisement or as a DCM ConfigItem, with no validation), and the sms_def.mof edit to pull the info back into your DB. Some of what it returns you’ll already have from ARP (name, version), but the golden nuggets of info are the SerialNumber, and whether it’s part of a Suite (according to that blog, anyway). There’s also something about "licensedState", but one of my test boxes had a serial number, but said it was unlicensed. Not sure what that is really about–that the human didn’t click on something after launching to register online? Not sure. But hey, that field is there if it means anything. You could always set that to FALSE in the mof if that LicenseState information is pointless.

What was nice about the above routine was that in the "partofasuite" returned results, it would say "Std" or "Pro" right in there, so that when the licensing folk would come knocking and ask for your pro vs std counts, it was relatively easy to run a report, and show them exactly what you had out there, based on Adobe's own information. With the "DC" version, they've apparently decided to make it even MORE difficult to tell the difference between Pro vs. Std.

Here's a new link to their swid tag information: http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/identify.html

Fortunately, the Script + Mof edit will pull back all of the information necessary to tell the difference, it just makes reports more, uh... "fun"

http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/identify.html#identifying-dc-installs

and basically you'll see that that std, the serial numbers start with 9101 and for pro, the serial numbers start with 9707

Here's a sample report, once you've created the ConfigItem and Baseline, deployed it, and imported the mof snippet into inventory, and start getting back results:

This sample report is ONLY for Acrobat, there are other Adobe products returned with the AdobeInfo routine, so this is just a sample report, it's not meant to showcase everything returned.

;with cte as (
Select distinct resourceid, Case when a.SerialNumber0 like '9101%' then 'Std'
when a.SerialNumber like '9707%' then 'Pro' end as 'Type',
Case when a.PartOfASuite0 like 'v7%' then 'DC'
when a.PartOfASuite0 like 'v6%' then '11'
when a.PartOfASuite0 like 'Acrobat%' then '10' end as 'Version'
from v_gs_AdobeInfo0
where a.PartOfASuite0 like 'v%{}Acrobat%' or a.PartOfASuite0 like 'Acrobat%'
)
select cte.version as [Acrobat Version] , cte.type as [Acrobat Type] ,count(*) as 'Count'
from cte group by [version], [type]
order by [version], [type]
would result in something sorta like this (#'s have been changed from my production environment to fake #'s)
Acrobat Version Acrobat Type Count
10                    Pro                20
10                    Std                15
11                    Pro                300
11                     Std               210
DC                   Pro                700
DC                   Std                800
Of course, the best part of this routine is *if* Adobe comes knocking, you can show them that the information about pro vs. std originates from their SWID tag files, and you can point to their web site about how to tell the difference, so they should be satisfied and quickly leave you alone (unless, of course... you did deploy Pro to all of your environment, and you thought you were deploying Standard... well, then... pay up...)

--> Link --< to get the mof file for importing for ConfigMgr Inventory, and the script to add to a Configuration Item (or you could deploy it as a recurring Advertisement, if you are adverse to Configuration Baselines).  Basically, the client, on a recurring basis, needs to run the script to populate--or wipe and re-populate--the custom WMI location with the Adobe swid tag information.

CM12, SCCM

  • Created on .

Copyright © 2018 - The Minnesota System Center User Group